The Broan-NuTone BHFLED110 PowerHeat Bathroom Exhaust Fan is worth buying if noise is your main worry. On my sound meter it read 58.1 decibels at ear level, about normal conversation volume, and 68 right at the grille. Buy it if you want a quiet 110 CFM fan with heat and LED light. Skip it if you need near-silent.
This post contains affiliate links. I may earn a commission at no extra cost to you.
How this review was made: written from my own video review of this product. Every opinion here is my own, from using it myself.
Quick Verdict
68 decibels with the meter pressed to the grille, 58.1 at ear level. That second number is the one that matters, and it’s about normal conversation volume. It hits the middle ground: audible but not intrusive.
Buy if you:
- want a little white noise in the bathroom instead of dead silence
- have a cold bathroom and want the 1500-watt heater running with the fan
- are replacing an old rattling fan and want 110 CFM of pull
- want the light, heat, and fan on separate switches
Skip if you:
- need near-silent, because right at the grille it hits 68 dB and that’s closer to an annoying sound level
- have a bathroom directly under a bedroom where any hum travels
- can’t fit 16″ x 10-1/4″ x 5-7/8″ housing in your ceiling joist bay
Clicking takes you to Amazon. As an Amazon Associate we earn from qualifying purchases — pricing and availability subject to change.
| Airflow | 110 CFM |
|---|---|
| Rated noise | 2 sones |
| Heater | 1500 watts |
| LED color temps | 2700K / 3500K / 5000K, dimmable |
| Housing size | 16″ x 10-1/4″ x 5-7/8″ |
| Fits | 2″ x 6″ ceiling construction |
I Put a Sound Meter Right Against the Grille
68 decibels. That’s what I got holding the meter right up against the fan. Then I pulled it back to about ear level, standing where you’d normally stand, and it dropped to 58.1. That gap is the whole story with this Broan-NuTone BHFLED110 PowerHeat Bathroom Exhaust Fan.
I turned the LEDs off before testing so the light wasn’t part of the picture. Just the fan running. In the video you can hear exactly what 58.1 dB sounds like from standing height, closer to someone talking in the next room than to a shop vac.
58.1 dB Is About Normal Conversation
At ear level this exhaust fan sits right around the volume of two people talking. You can hear it. You’re not shouting over it. It gives you that little bit of white noise when you’re doing your business, which is the part I think people actually want from a bathroom fan and don’t say out loud.
Get closer to it and it’s a different story. Right at the grille that 68 reading is closer to an annoying sound level. Standing on a step stool with your head near the ceiling, you’d notice. Standing on the floor like a normal person, you don’t. Broan rates it at 2 sones, and the meter numbers line up with that being a mid-range quiet rather than a whisper fan.
If you’re cross-shopping on silence alone, this loses to a 1-sone whisper fan, but those typically top out around 80 CFM. At 58.1 dB it fades into the background in about ten seconds, which is a different category than intrusive.
Lab Sone Ratings Don’t Match Your Bathroom
Sone ratings get measured in a lab, not in your bathroom. That’s why I pulled the meter out instead of trusting the box. A 2-sone fan in a small tiled room with hard surfaces everywhere is going to read differently than the same fan in a test chamber, and tile bounces sound around in a way drywall doesn’t.
The other misconception is that CFM and quiet are opposites. This one moves 110 CFM, which is real ventilation, and still landed at 58.1 at ear level. You don’t have to trade all your airflow away to get a fan you can stand to listen to.
And remember that the heater and the LED are separate functions here. They run independently or together. When I was testing I had the LEDs off entirely, so what you’re hearing is just the fan motor, not the whole combo unit working at once.
Check the Size Before You Order
Full housing is 16″ x 10-1/4″ x 5-7/8″, and it’s built for 2″ x 6″ ceiling construction. Measure your joist bay first. The housing is galvanized steel, and a 1500-watt heater means you’re looking at a dedicated circuit, so this is a project where an electrician earns their money if you’re not comfortable in a ceiling.
One thing worth knowing on timing: the price on this one moves around a lot. Right now it’s sitting well above where it’s usually been over the last three months, and it’s been considerably cheaper at points. Check the current price before you pull the trigger rather than assuming today’s number is the normal one.
Who This Exhaust Fan Is For
This is for the person with a cold bathroom and an old fan that sounds like a blender. You get 110 CFM of pull, a 1500-watt heater, and a dimmable LED that switches between warm white, bright white, and daylight. Three jobs, one hole in the ceiling.
It’s not for you if silence is the whole requirement. 58.1 at ear level is a comfortable hum, not nothing. It’s also selling a bit slower than it was recently, ranking #8,026 in Tools & Home Improvement against a 90-day average of #6,591, though Amazon still reports over 500 bought in the past month. So it’s a popular unit, just not in one of its hot stretches.
Pros
- 58.1 dB at ear level, about normal conversation, so it fades into the background
- 110 CFM of airflow without a noise penalty
- Fan, 1500-watt heater, and LED all work independently or together
- Dimmable LED with three color temps (2700K, 3500K, 5000K)
- Galvanized steel housing instead of thin plastic
Cons
- 68 dB right at the grille is closer to an annoying sound level
- Housing needs 2″ x 6″ ceiling construction, so measure before ordering
- Price swings a lot, and right now it’s above its typical level
Frequently Asked Questions
Does the heater need its own circuit?
A 1500-watt heater is a serious electrical load, so plan on a dedicated circuit and confirm with your local code before you start cutting. This isn’t a swap where you reuse the old fan’s single wire and call it done. If you’re not comfortable with that, get an electrician for the wiring and handle the mounting yourself.
Can I use the LED as a nightlight?
Yes, the LED is dimmable and Broan lists nightlight use as one of the intended modes. Set it to the 2700K warm white and dim it down and it’s soft enough for a 2 a.m. trip. The light runs independently of the fan, so you’re not forced to listen to the motor.
How do I clean the grille?
Cut power at the breaker, pull the white grille down, and vacuum the dust off the cover and the visible housing. Bathroom fans pull lint and dust constantly, so once or twice a year keeps airflow where it should be. A clogged grille makes any exhaust fan sound louder than it is.
Will it work in a laundry room or small bedroom?
Broan says the 1500-watt heater provides heating throughout any room, so it isn’t strictly a bathroom part. The practical limit is fit, since you need 2″ x 6″ ceiling construction and room for the 16″ x 10-1/4″ housing. Just run the exhaust to the outside, not into an attic.
Get it now
Broan-NuTone BHFLED110 PowerHeat Bathroom Exhaust Fan
Get the best price on Amazon →Affiliate link. See the disclosure at the top of this post.
If your bathroom is cold, your old fan is loud, and 58 decibels of background hum sounds fine to you, this one’s an easy one to look at on Amazon. If silence is the priority, keep looking, but if you want 110 CFM, a 1500-watt heater, and a hum that fades in ten seconds, this is a hard combo to beat at this price point.
🛍️ Shop everything in this video
Every product mentioned, in one place. These are affiliate links, so I may earn a small commission at no extra cost to you.
🛍️ Broan-NuTone BHFLED110 Bathroom Exhaust Fan: check price on Amazon →
🛍️ Sound Level Meter: check price on Amazon →

