This nail free wall mount broom holder is worth buying if you rent or just don’t want holes in your wall. It installs with included nail-free adhesive on smooth surfaces, grips handles 0.7 to 1.3 inches thick, and gives you 4 racks plus 5 hooks in 304 stainless steel. Skip it if your wall is rough.
This post contains affiliate links. I may earn a commission at no extra cost to you.
How this review was made: written from my own video review of this product. Every opinion here is my own, from using it myself.
Quick Verdict
No nails are put on here. The mount I show in the video went up with the nail-free adhesive they include, and the rubber balls mean it’s not going to hit just bare metal on your handles.
Buy if you:
- rent and can’t put holes in drywall
- have smooth, flat wall surface to stick it to
- store brooms, mops or rakes with 0.7 to 1.3 inch handles
- want two units and 5 hooks for a garage wall
Skip if you:
- need it usable the same day, the adhesive wants 24 to 48 hours to cure
- have textured, rough or painted-rough walls
- want to hang handles thicker than 1.3 inches
Clicking takes you to the seller's website. We may earn a small commission if you purchase, at no extra cost to you.
| Material | 304 rustproof stainless steel |
|---|---|
| Dimensions | 15.95″ D x 3.35″ W x 2.56″ H |
| Weight | 1.7 lb per unit |
| Config | 4 racks, 5 hooks (2-pack) |
| Handle fit | 0.7 to 1.3 in diameter |
No Nails Are Put On Here
The one in my video went up with zero holes in the wall. They give you this nail free adhesive, and all you do is squirt it along the back, press it up, and let it sit. The description says 24 to 48 hours before you load it, which is the part people skip and then wonder why it slid. You can check the current price here if you want the color options.
Will the Steel Hold Up?
The bar itself is not going to be your problem. At 304 stainless, it fits a broom, a mop, and a rake side by side without flexing, and it won’t rust in a damp laundry room or a humid garage. The only thing that can let you down here is the adhesive bond, and that’s entirely a wall-surface issue, not a materials one.
The Rubber Balls Do the Gripping
Spring-loaded rubber balls clamp the handle instead of a hard metal jaw, so a metal broom handle goes in and comes out without a scratch. The grip range is 0.7 to 1.3 inches in diameter, that covers most standard broom, mop, and rake handles without any adjustment. You could do it one of two ways, by the way: adhesive on smooth walls, or the included screws if your surface is rough.
Renters, Garages, and Who Should Drill Instead
The adhesive route is the whole point for renters, no holes, no patching, deposit intact. But if your garage wall is textured block or your laundry room has rough paint, skip the adhesive entirely and go straight to the screws. They’re already in the box, and the steel is sturdy enough that the screw mount is the more permanent setup anyway. If that sounds like your situation, it’s an easy one to check the current price on.
Pros
- Goes up with no nails at all
- Rubber balls won’t scratch metal handles
- 304 stainless steel construction
- Two install methods included
Cons
- 24 to 48 hour wait before loading it
- Adhesive route needs a smooth wall
- Handles over 1.3 inches won’t fit the grips
Learn more
Nail Free Wall Mount Broom Holder
Check the current price →Affiliate link. See the disclosure at the top of this post.
🛍️ Shop everything in this video
Every product mentioned, in one place. These are affiliate links, so I may earn a small commission at no extra cost to you.
🛍️ Zero Nails Wall Mount Adhesive: check price on Amazon →

